Medium Soft-Edge
By adding the correct clip-on piece, a cut length of barber loop is transformed into a soft-edge spring that gives the customer the needed support along the front edge of the seat.
|
![Medium Soft-Edge](/images/Medium_Soft-Edge.png) |
V-Arc
A single piece back-spring that combines the correct bends and curves to give the required feel and result necessary. Available in regular, medium, and large loop.
|
![V-Arc](/images/V-Arc.png) |
D-End
Barber loop cut lengths can be manufactured with turned-down, drive-in ends called "D-Ends" for insertion into wood frames. The D-Ends are then fastened in place with staples.
|
![D-End](/images/D-End.png) |
Z-Hook End
Barber Loop cut lengths can be manufactured with Z-Hook ends. This type end is often selected for use in tubular or angle-iron frames. All Z-hook ends are self-fastening.
|
![Z-Hook End](/images/Z-Hook_End.png) |
Joggle Ends
Joggle end sinuous treatments were created to fasten directly into steel tubing or flat steel surfaces. No clips or hooks are required.
|
![joggle-ends](/images/joggle-ends.png) |